Load Break Switch Panel
intranselectro@gmail.com
![](https://intranselectro.com/wp-content/uploads/2021/01/Load-Break-Switch-Panel.jpg)
Load Break Switch Panel
Load break switch panel is used to Switch ON/OFF the 11KV supply to the consumer. The panel is installed in indoor. This is installed in between the incoming Board supply and distribution transformer provided at the customer’s premises. Load Break Switch Panels are available with and without metering facilities.
1. LOAD BREAK SWITCH PANEL (LBSP) without metering facility consists of..
» 11KV Air break switch with HT Fuse and earthing facility & interlocking.
» Completely segregated incoming and outgoing cable compartments with Epoxy resin cast seal off bushings.
2. LOAD BREAK SWITCH PANEL (LBSP) WITH METERING facility (LBSMP) consists of
» 11KV Air break switch with HT Fuse and earthing facility & interlocking.
» Resin cast Current Transformers of suitable ratios
» Separate PT Chamber with fixed/withdrawable type resin cast Potential Transformers.
» Completely segregated incoming and outgoing cable compartments with Epoxy Resin Cast seal off bushings.
» Separate TOD meter compartment with provision for approved make of Electronic TOD Meter.
» Test terminal block.
» LT Fuses etc.
Special Features
INTRANS Load break switch panel for indoor use have the following Special Features :
» Load break switch and accessories are housed in a vermin and weather proof welded panel. These panels are pretreated with 7 tank phosphating process and stove enamelled.
» Earthing switch and earthing interlocks are provided.
» Cable gland plate is provided at the top/bottom of the panel for entry/exit as required.
» Provisions for sealing by the Electricity Board Authority
» Complete conformation to all the relevant Indian Standard Specifications.
» Electronic Meter with TOD (Time-of-Day) metering facility : The meter is versatile enough to register the maximum demand in separate preset periods of the day. With the present control measures this eliminates the need for additional meters for day and for night demand. This can help in planning operations to increase load and reduce average KWH costs. Similar facility regarding active energy consumption at various times of the day is also provided